Home FAQ GSM
22 | 05 | 2012
GSM
  • 1 - GUIDA d'installazione di un modem GSM

    Il documento seguente descrive come installare i modem GSM in ALERT.

    pdf

  • 2 - Quale formato SMS devo scegliere ?

    Durante la configurazione di un modem GSM, il formato degli SMS per default è « Auto ».
    In questo caso, Alert gestisce esso stesso il formato migliore per l'invio degli SMS, in funzione dei 2 formati (PDU e Testo) supportati dal modem.
    Per default il formato suggerito è PDU, che permette di avere accesso a tutte le funzionalità della norma GSM.
    Il formato « testo » viene utilizzato per i test.
  • 3 - Come si configura il numero di telefono per l'invio di SMS ?

    Per l'invio di SMS raccomandiamo di settare il numero dell'operatore destinatario con il formato internazionale a livello della configurazione, inserendo quindi il codice del Paese (per esempio +39 per l'Italia).
    Alert aggiunge automaticamente il codice del Paese se il numero di telefono dell'operatore destinatario è più lungo di 8 caratteri.
  • 4 - Il segnale GSM è debole dove è installato il modem GSM: cosa fare ?

    Si hanno due possibilità:
    • Portare l'antenna in un punto in cui il segnale GSM è più forte: la distanza massima dal modem è di 30 metri;

    • Utilizzare un convertitore RS232 / IP oppure USB / IP: sono stati testati diversi convertitori RS232 / IP e USB / IP, che permettono di installare il modem in rete con la stazione Alert, posizionandolo anche in questo caso in un punto in cui il segnale GSM è più forte.

    In entrambi i casi l'utilizzo del modem GSM non cambia.

  • 5 - AT+CPIN? Risposta con errore

    Attivare il rapporto di errore esteso (con il comando AT+CMEE=1) per ottenere il codice di errore e verificare la causa dell'errore.
    Le cause possibili sono:
    • Scheda SIM o connettore della scheda SIM inserito non correttamente
    • SIM difettosa
    • Lettore della scheda SIM difettoso
    • La scheda SIM non viene riconosciuta (SIM a 5V inserita in un modem o modulo compatibile solamente con schede SIM a 3V).
    Potete altresì attivare l'opzione "+WIND non sollecitati" per esempio per mezzo del comando AT+WIND=1.
    Questo comando fornisce, in questo caso, indicazioni su modifiche sul connettore della scheda SIM (scheda SIM inserita, scheda SIM rimossa).
    Verificate il codice di errore sulla documentazione in vs. possesso.
  • 6 - +CMS ERROR: 512

    Il GSM TS 04.08 precisa che se un SMS viene ricevuto mentre si sta cercando di inviare un SMS, quest'ultimo potrebbe essere respinto.

  • 7 - +CMS ERROR: 513

    Un errore +CMS ERROR: 513 è dovuto a 3 possibili cause:

    • La MS (Mobile Station) perde la connessione radio (oppure la rete richiede una disconnessione RR)
    • La MS (Mobile Station) non riconosce la ricevuta di ritorno della rete (CP_ACK) dopo 28 secondi dalla trasmissione dei messaggi corti di dati (CP_DATA)
    • La MS (Mobile Station) non riconosce la ricevuta di ritorno della rete (CP_DATA (RP_ACK)) dopo 42 secondi dalla richiesta di apertura dei canali
  • 8 - +CMS ERROR: 514

    Questo errore viene ricevuto dalla rete quando il valore dell'Adresse Service Center non è corretto, oppure quando il valore dell'indirizzo di destinazione non è corretto.
    Questo errore significa che l'SMS è stato effettivamente inviato dal modulo (e correttamente formattato), ma è stato rifiutato dalla rete (il numero del destinatario non è un numero mobile / GSM, il valore del Centro Servizi non è corretto, il servizio non è disponibile, DCS non preso in carico, ...).
    Il cliente deve quindi verificare le informazioni contenute nell'SMS.
  • 9 - CMS (GSM Network Related) errors

    CMS ERROR: 1 Unassigned number
    CMS ERROR: 8 Operator determined barring
    CMS ERROR: 10 Call bared
    CMS ERROR: 21 Short message transfer rejected
    CMS ERROR: 27 Destination out of service
    CMS ERROR: 28 Unindentified subscriber
    CMS ERROR: 29 Facility rejected
    CMS ERROR: 30 Unknown subscriber
    CMS ERROR: 38 Network out of order
    CMS ERROR: 41 Temporary failure
    CMS ERROR: 42 Congestion
    CMS ERROR: 47 Recources unavailable
    CMS ERROR: 50 Requested facility not subscribed
    CMS ERROR: 69 Requested facility not implemented
    CMS ERROR: 81 Invalid short message transfer reference value
    CMS ERROR: 95 Invalid message unspecified
    CMS ERROR: 96 Invalid mandatory information
    CMS ERROR: 97 Message type non existent or not implemented
    CMS ERROR: 98 Message not compatible with short message protocol
    CMS ERROR: 99 Information element non-existent or not implemente
    CMS ERROR: 111 Protocol error, unspecified
    CMS ERROR: 127 Internetworking , unspecified
    CMS ERROR: 128 Telematic internetworking not supported
    CMS ERROR: 129 Short message type 0 not supported
    CMS ERROR: 130 Cannot replace short message
    CMS ERROR: 143 Unspecified TP-PID error
    CMS ERROR: 144 Data code scheme not supported
    CMS ERROR: 145 Message class not supported
    CMS ERROR: 159 Unspecified TP-DCS error
    CMS ERROR: 160 Command cannot be actioned
    CMS ERROR: 161 Command unsupported
    CMS ERROR: 175 Unspecified TP-Command error
    CMS ERROR: 176 TPDU not supported
    CMS ERROR: 192 SC busy
    CMS ERROR: 193 No SC subscription
    CMS ERROR: 194 SC System failure
    CMS ERROR: 195 Invalid SME address
    CMS ERROR: 196 Destination SME barred
    CMS ERROR: 197 SM Rejected-Duplicate SM
    CMS ERROR: 198 TP-VPF not supported
    CMS ERROR: 199 TP-VP not supported
    CMS ERROR: 208 D0 SIM SMS Storage full
    CMS ERROR: 209 No SMS Storage capability in SIM
    CMS ERROR: 210 Error in MS
    CMS ERROR: 211 Memory capacity exceeded
    CMS ERROR: 212 Sim application toolkit busy
    CMS ERROR: 213 SIM data download error
    CMS ERROR: 255 Unspecified error cause
    CMS ERROR: 300 ME Failure
    CMS ERROR: 301 SMS service of ME reserved
    CMS ERROR: 302 Operation not allowed
    CMS ERROR: 303 Operation not supported
    CMS ERROR: 304 Invalid PDU mode parameter
    CMS ERROR: 305 Invalid Text mode parameter
    CMS ERROR: 310 SIM not inserted
    CMS ERROR: 311 SIM PIN required
    CMS ERROR: 312 PH-SIM PIN required
    CMS ERROR: 313 SIM failure
    CMS ERROR: 314 SIM busy
    CMS ERROR: 315 SIM wrong
    CMS ERROR: 316 SIM PUK required
    CMS ERROR: 317 SIM PIN2 required
    CMS ERROR: 318 SIM PUK2 required
    CMS ERROR: 320 Memory failure
    CMS ERROR: 321 Invalid memory index
    CMS ERROR: 322 Memory full
    CMS ERROR: 330 SMSC address unknown
    CMS ERROR: 331 No network service
    CMS ERROR: 332 Network timeout
    CMS ERROR: 340 No +CNMA expected
    CMS ERROR: 500 Unknown error
    CMS ERROR: 512 User abort (spécifique a certain fabricants)
    CMS ERROR: 513 Unable to store
    CMS ERROR: 514 Invalid Status
    CMS ERROR: 515 Device busy or Invalid Character in string
    CMS ERROR: 516 Invalid length
    CMS ERROR: 517 Invalid character in PDU
    CMS ERROR: 518 Invalid parameter
    CMS ERROR: 519 Invalid length or character
    CMS ERROR: 520 Invalid character in text
    CMS ERROR: 521 Timer expired
    CMS ERROR: 522 Operation temporary not allowed
    CMS ERROR: 532 SIM not ready
    CMS ERROR: 534 Cell Broadcast error unknown
    CMS ERROR: 535 Protocol stack busy
    CMS ERROR: 538 Invalid parameter
  • 10 - Errori CME (GSM Equipment Related)

    CME ERROR: 0 Phone failure
    CME ERROR: 1 No connection to phone
    CME ERROR: 2 Phone adapter link reserved
    CME ERROR: 3 Operation not allowed
    CME ERROR: 4 Operation not supported
    CME ERROR: 5 PH_SIM PIN required
    CME ERROR: 6 PH_FSIM PIN required
    CME ERROR: 7 PH_FSIM PUK required
    CME ERROR: 10 SIM not inserted
    CME ERROR: 11 SIM PIN required
    CME ERROR: 12 SIM PUK required
    CME ERROR: 13 SIM failure
    CME ERROR: 14 SIM busy
    CME ERROR: 15 SIM wrong
    CME ERROR: 16 Incorrect password
    CME ERROR: 17 SIM PIN2 required
    CME ERROR: 18 SIM PUK2 required
    CME ERROR: 20 Memory full
    CME ERROR: 21 Invalid index
    CME ERROR: 22 Not found
    CME ERROR: 23 Memory failure
    CME ERROR: 24 Text string too long
    CME ERROR: 25 Invalid characters in text string
    CME ERROR: 26 Dial string too long
    CME ERROR: 27 Invalid characters in dial string
    CME ERROR: 30 No network service
    CME ERROR: 31 Network timeout
    CME ERROR: 32 Network not allowed, emergency calls only
    CME ERROR: 40 Network personalization PIN required
    CME ERROR: 41 Network personalization PUK required
    CME ERROR: 42 Network subset personalization PIN required
    CME ERROR: 43 Network subset personalization PUK required
    CME ERROR: 44 Service provider personalization PIN required
    CME ERROR: 45 Service provider personalization PUK required
    CME ERROR: 46 Corporate personalization PIN required
    CME ERROR: 47 Corporate personalization PUK required
    CME ERROR: 48 PH-SIM PUK required
    CME ERROR: 100 Unknown error
    CME ERROR: 103 Illegal MS
    CME ERROR: 106 Illegal ME
    CME ERROR: 107 GPRS services not allowed
    CME ERROR: 111 PLMN not allowed
    CME ERROR: 112 Location area not allowed
    CME ERROR: 113 Roaming not allowed in this location area
    CME ERROR: 126 Operation temporary not allowed
    CME ERROR: 132 Service operation not supported
    CME ERROR: 133 Requested service option not subscribed
    CME ERROR: 134 Service option temporary out of order
    CME ERROR: 148 Unspecified GPRS error
    CME ERROR: 149 PDP authentication failure
    CME ERROR: 150 Invalid mobile class
    CME ERROR: 256 Operation temporarily not allowed
    CME ERROR: 257 Call barred
    CME ERROR: 258 Phone is busy
    CME ERROR: 259 User abort
    CME ERROR: 260 Invalid dial string
    CME ERROR: 261 SS not executed
    CME ERROR: 262 SIM Blocked
    CME ERROR: 263 Invalid block
    CME ERROR: 772 SIM powered down
  • 11 - Come si acquisiscono gli allarmi ricevuti da Alert tramite SMS ?

    Per poter acquisire gli allarmi ricevuti da Alert tramite SMS, occorre utilizzare uno script apposito.

    Per installare lo script, occorre seguire le indicazioni contenute nel file AckAlarmSMS lisezmoi.txt nella directory C:\MMI\Alert